NGHIÊN CỨU PHÂN TÍCH ĐỘNG HỌC VÀ ĐẶC TÍNH LỰC CỦA HỆ TRUYỀN ĐỘNG KHÍ NÉN TRONG THIẾT BỊ LEG PRESS

Tóm tắt

Bài báo này trình bày nghiên cứu mô phỏng động học và đặc tính lực của hệ truyền động khí nén ứng dụng trong thiết bị leg press. Mô tả chuyển động tịnh tiến của piston dưới tác dụng của áp suất khí nén, trong đó lực kích hoạt, lực cản và độ trễ hệ thống được xem xét đầy đủ. Mô phỏng được thực hiện bằng COMSOL Multiphysics với mô đun Global ODEs and DAEs nhằm phân tích các đáp ứng chuyển vị, vận tốc, gia tốc và lực tác dụng theo thời gian. Kết quả cho thấy hệ khí nén có độ trễ rõ rệt trong giai đoạn tăng áp, vận tốc đạt cực đại trong khoảng thời gian ngắn sau khi kích hoạt và lực cản đóng vai trò quan trọng trong việc ổn định chuyển động piston. Các phân tích thu được góp phần mô tả rõ hơn đặc tính đáp ứng của hệ truyền động khí nén, từ đó làm cơ sở tham khảo cho việc thiết kế và điều chỉnh các thông số vận hành của thiết bị leg press.

 

Từ khóa:

Leg press, Khí nén, Động học piston, Mô phỏng COMSOL, Lực kích hoạt, Phục hồi chức năng

Title

STUDY ON KINEMATIC ANALYSIS AND FORCE CHARACTERISTICS OF PNEUMATIC DRIVE SYSTEM IN LEG PRESS EQUIPMENT

Abstract

This paper presents a study on the kinematic simulation and force characteristics of the pneumatic drive system applied in the leg press device. The translational motion of the piston under the effect of pneumatic pressure is described, in which the activation force, resistance force and system hysteresis are fully considered. The simulation is performed using COMSOL Multiphysics with the Global ODEs and DAEs module to analyze the displacement, velocity, acceleration and force responses over time. The results show that the pneumatic system has a clear hysteresis in the pressurization phase, the velocity reaches its maximum in a short time after activation and the resistance force plays an important role in stabilizing the piston motion. The obtained analysis contributes to a clearer description of the response characteristics of the pneumatic drive system, thereby serving as a reference basis for the design and adjustment of the operating parameters of the leg press device.

 

Keywords:

Leg press, Pneumatic, Piston kinematics, COMSOL simulation, Activation force, Rehabilitation

Tải xuống

Ngày nhận bài:

15-01-2026

Ngày phản biện:

03-02-2026

Ngày nhận bài sửa:

06-02-2026

Ngày duyệt đăng:

08-02-2026

Ngày xuất bản:

10-02-2026
NGHIÊN CỨU – TRAO ĐỔI
Lượt xem
1
Lượt tải
1